Kriss Vector CRB Lower

Kriss Vector CRB Lower

The Kriss Vector for sale series are a family of weapons based upon the parent submachine gun. The design developed by the American company Kriss USA, formerly Transformational Defense Industries (TDI). They use an unconventional delayed blowback system. This, combined with in-line design to reduce perceived recoil and muzzle climb.

Also, the Vector family has undergone two generations of modification. The Gen I version is the baseline model of the Vector family. Thus it was later replaced by the improved Gen II version. This kriss vector for sale gen II features a redesigned pistol grip and trigger. Also, it has the swing angle of the safety lever reduced from 120 to 45 degrees.

It also eliminates the opening above the barrel for the original weapon’s optional Surefire weapon light. They no longer manufacture these. In addition to the original Flat Black finish, optional factory Cerakoe coatings now come in Olive Drab (green), Flat Dark Earth (tan), Alpine (white), or Combat Gray.

Kriss Vector CRB Lower

The kriss Vector for sale uses an articulated mechanism referred to as the “Kriss Super V,”. This allows the bolt and an inertia block to move downward into a recess behind the magazine well. The theory is that at the end of this travel, the energy is transmitted downward rather than rearward. Thus reducing the felt recoil.

When fired, the barrel axis is in line with the shoulder as in the M16 rifle, but also in line with the shooter’s hand. This helps to reduce muzzle climb when combined with the off-axis bolt travel. This it also greatly raises the sight line in comparison to the bore axis. Furthermore, the initial prototype model by TDI achieved a rate of fire of 1,500 rounds per minute (RPM). But they brought this down to around 1,200 rounds per minute (RPM) on the production models.

                                                             Kriss Vector CRB Lower

The Kriss Vector for sale is split into two major assemblies in a similar manner to the AR-15 rifle, secured together with four push pins. Due to the weapon’s unusual layout, the lower contains the action, charging handle, magazine well and barrel. Meanwhile the upper contains the ejection port, rail system, pistol grip and fire control components, as well as the stock for configurations that have one.

This modular design of the kriss vector for sale allows for toolless caliber conversions. Done by swapping out only the lower. The Vector’s safety is ambidextrous (as well as the fire mode selector on the auto trigger pack). Meanwhile the ejection port, charging handle, bolt release catch and magazine releases are not. Instead, they are only available in a right-handed configuration.

                                                           Kriss Vector CRB Lower

To drastically minimize felt recoil and muzzle climb, the KRISS Super V Recoil Mitigation Mechanism employs a novel nonlinear operating system that revectors energy down and away from the shooter’s shoulder. This method enables the shooter to recover more quickly, allowing for faster and more precise sequential shots.
Designed to Complement Your Lifestyle
The KRISS Super V Recoil Mitigation System is enhanced with a low bore axis that aligns the barrel with the user’s arm. This allows the user’s body and the KRISS Super V System to work together for optimum control.
Interchangeability of Caliber
KRISS Vectors of the current generation can change calibers according to the user’s preferences. Disassembly without the use of tools

The KRISS Vector CRB is the most generally available model, including a rifle-length barrel that is compatible in 47 states. The Vector CRB is an excellent choice for both recreational and competitive pistol caliber carbine shooting. The CRB, like all KRISS Vector weapons, uses full-size Glock® magazines, providing for a variety of large-capacity alternatives.

The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, lies at the heart of the Vector CRB. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil.
KRISS USA VECTOR CRB, Carbine, 45 ACP, 16″, Black, KRISS USA VECTOR CRB, Carbine, 45 ACP, 16″, Black, KRISS USA VECTOR CRB DEFIANCE M4 S, KRISS Stock, Back-Up Front and Rear Sight

Kriss Vector CRB Lower

To drastically minimize felt recoil and muzzle climb, the KRISS Super V Recoil Mitigation Mechanism employs a novel nonlinear operating system that revectors energy down and away from the shooter’s shoulder. This method enables the shooter to recover more quickly and aids in the execution of precise sequential shots. The KRISS Super V Recoil Mitigation System is enhanced with a low bore axis that aligns the barrel with the user’s arm. KRKV45-CBL20 is the model number.

Kriss Vector CRB Lower

With an 18.6′′ barrel and a ten-round capacity magazine, the KRISS Vector CRB Canada is categorized as an unrestricted firearm. The Vector CRB is an excellent choice for both recreational and competitive pistol caliber carbine shooting. The CRB, like all KRISS Vector weapons, uses full-size Glock® magazines, providing for a variety of large-capacity alternatives.

The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, lies at the heart of the Vector CRB. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil.

Kriss Super V recoil mitigation system is patented.
Reset is loud and tactile, and the trigger is smooth.
Short throw ambidextrous safety lever
Mil-std 1913 is a military standard that was established in 1913. Bottom rail: picatinny
4-pin toolless disassembly of the Kriss vector improved barrel shroud
Compatible with Glock magazines

Caliber interchangeability without the need of tools
Mil-std1913 (full length) Top rail for a picatinny rifle
Folding sights with a low profile
With defiance, Kriss M4 stock adaptor M4 is a type of stock.

The patented KRISS Vector Platform is one of the most inventive breakthroughs in current guns technology. The Super V Recoil Mitigation System is at the heart of each Vector. This one-of-a-kind operating system transfers energy away from the shooter, eliminating feeling recoil and muzzle ascent.

Kriss Vector CRB Lower

The KRISS Vector GEN II is the next step in the Vector’s progression from a single-caliber weapon to a multi-caliber weapon system. The KRISS Vector is available in.45ACP and 9mm and can be used with any Glock magazine. Without the use of any tools, switching between calibers can be done in seconds. With a revised trigger and a short throw a, the KRISS Vector GEN II is more ergonomic.

The Kriss Vector Gen II is a pistol-caliber carbine with Kriss’s innovative Super V delayed-blowback mechanism (chambered in.45 ACP and 9mm). The force of the recoil redirects downward into the gun, rather than pulling back on you, the shooter. This reduces the amount of kick you get while shooting and helps you keep your aim stable. This is especially crucial when shooting a large number of bullets at once.

The Gen II CRB’s delayed-blowback internals give it a distinct look and feel from most firearms. On the forward left side of the gun, the non-reciprocating charging handle is flush against the gun. If you desire to lock or lower the bolt back into position, the bolt release is located below the charging handle.

Kriss Vector CRB Lower

Kriss in the United States The KRISS Super V recoil reduction technology is featured on the Kriss Vector Gen II CRB. This cutting-edge nonlinear operating mechanism re-vectors energy away from the shooter’s shoulder, reducing felt recoil and muzzle ascent at the same time. You’ll notice right away that you’ll be able to recover faster, allowing for faster and more accurate sequential shot strings.

The Vector Gen II, in addition to possessing a futuristic appearance, enables tool-less caliber interchangeability and GLOCK magazine interchangeability for ultimate modularity and flexibility. In addition, the Vector Gen II has a full-length picatinny rail that is ideal for mounting.

Kriss Vector CRB Lower

So, what else distinguishes this carbine’s appearance? The 16-inch barrel is actually a barrel shroud, which is flat and almost rectangular in appearance. Picatinny rails run the length of the pistol, with another few inches underneath in front of the magazine well. Flip-up Magpul MBUS sights are also included with the Kriss Vector.

Kriss in the United States Kriss Vector Gen II CRB Semi-Auto Rifle (Kriss Vector Gen II CRB Semi-Auto Rifle) (Black) The pistol grip feature has been removed, the stock has been locked in place, and the magazine capacity has been reduced to 10 rounds, making the KRISS Vector CRB – California state compliant. The Vector CRB is an excellent choice for both recreational and competitive pistol caliber carbine shooting.

The KRISS Vector CRB is the most generally available model, including a rifle-length barrel that is compatible in 47 states. The Vector CRB is an excellent choice for both recreational and competitive pistol caliber carbine shooting. The CRB, like all KRISS Vector weapons, uses full-size Glock® magazines, providing for a variety of large-capacity alternatives.

The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, lies at the heart of the Vector CRB. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil.

Kriss Vector CRB Lower

The CRB, like all KRISS Vector weapons, uses full-size Glock® magazines, providing for a variety of large-capacity alternatives. The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, lies at the heart of the Vector SDP. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil. Recoil Mitigation System Super V Compatibility with Glock® magazines Axis of low bore Flip sights with a low profile Picatinny top rail, full length Stock Kydex grip wrap has been fixed.

Overall Length: 36.38 in / 923.9 mm Operating System: 10 Barrel Length: 16.0′′ Barrel Length: 16.0′′ Overall Length: 36.38 in / 923.9 mm
Type of action: Closed Bolt, Delayed Blowback
Stocks that are semi-automated
BLACK is the standard stock color. Weight: 3.6 kg / 8.0 lb

Kriss Vector CRB Lower

SDP-E G2 KRISS VECTOR SDP ENHANCED KRISS VECTOR 6.5 “BLACK 9MM PISTOL 15RD GLOCK MAGS 811607033663 KV90PBL30 KV90-PBL30 MWS BARREL THREADED WITH SBA3 BRACE (BRACE INSTALLED BY US) SDP-E G2 KRISS VECTOR SDP ENHANCED KRISS VECTOR 6.5 “10MM BLACK BRACE WITH
KRISS VECTOR SDP-E KRISS VECTOR SDP ENHANCED 10MM KRISS VECTOR SDP ENHANCED

The KRISS Vector GEN II is the latest generation of the Vector platform, transforming it from a single-caliber pistol to a multi-caliber weapon system that uses the popular Glock magazine. Without the use of any tools, switching between calibers can be done in seconds. With a revised trigger, a short throw ambidextrous safety lever, and a more comfortable pistol grip, the KRISS Vector GEN II is more ergonomic.

The KRISS Vector SBR is an NFA-regulated short barrel rifle with a 5.5″ barrel for suppressor mounting. The fixed KRISS M4 type stock has a large range of adjustment to accommodate any user. The flip sights and full length picatinny top are also standard on the KRISS Vector SBR.

Kriss Vector CRB Lower

Patented KRISS Super V Recoil Mitigation System.
Glock™ magazine compatible.
Smooth trigger with audible and tactile reset.
Tool-less caliber interchangeability.
Ambidextrous short throw safety lever.
Full Length MIL-STD 1913 Picatinny top rail.
MIL-STD 1913 Picatinny bottom rail.
Low profile folding sights.
KRISS M4 Stock Adaptor with DEFIANCE® M4 Stock 4-pin.
Toolless disassembly.
Threaded barrel. 1/2 x 28 RH

Kriss Vector CRB Lower

The KRISS Vector SBR Enhanced is the Vector SBR’s most versatile version. More picatinny rail space for attachments has been added with the inclusion of the MK5 Modular Rail. The KRISS Ambidextrous Folding Stock, located at the rear of the receiver, reduces the total length of the Vector SBR Enhanced by more than nine inches when folded.

The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, is at the heart of the Vector SBR Enhanced. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil. The SBR Enhanced, like all KRISS Vector weapons, is fed by full-size Glock® magazines, allowing for ammo cross compatibility.

Kriss Vector CRB Lower

It’s a somewhat smaller version of the Vector, but it’s still powered by the same Super V technology. The main difference is a redesigned lower receiver for easy caliber interchangeability; by mounting alternative lower receivers, users can switch between 9x19mm,.40 S&W, and.45 ACP with just a single takedown pin.

The charging handle was also redesigned, now traveling diagonally, almost vertically, and may be installed on either side of the weapon. A new telescoping stock, rather than a folding one, and a four-sided accessory rail tube around the barrel were further noticeable differences.
In 2015, Kriss released “Gen II” copies of the original Vector models. These have this property.

Kriss Vector CRB Lower

These have a new pistol grip, trigger, and safety selector, as well as being compatible with a new 9x19mm lower. These appear to be the replacements for the K10 prototypes, albeit none of the K10’s characteristics were carried over. The Vector employs a “Kriss Super V” articulated system that permits the bolt and an inertia block to travel downward into a recess behind the magazine well.

According to the hypothesis, the energy is sent downward rather than backward at the end of this journey, lessening the sensation of recoil. When fired, the barrel axis is aligned with the shooter’s hand as well as the shoulder, like with the M16 rifle. When paired with the other features, this is supposed to reduce muzzle climb.